Test for surfaces to detect:
Cannabis,
Opiates,
Cocaine
and Amphetamines/Methamphetamines
Discard the test if the expiration date has been exceeded.
Remove the red sample collector
from the white test cassette.
Do not remove the protective
cap. Do not touch the sampling
pads.
Moisten the sampling pads on the
sample collector. Shake off any
excess water.
Using slight pressure, wipe
surface with the sample collector
approx. 5 to 6 times. Only dab
the surface if it is very rough.
Place the sample collector back
on the test cassette. The sample
collector must lock in place with
an audible double click.
Remove the protective cap and fil with water up to the marked level. Immerse the test strip in water for 15 seconds and then remove. Do not immerse the white plastic casing when doing so.
Leave the test undisturbed
on a horizontal surface. After
8 minutes, read the test result.
Results interpretation
